Royal Enfield Continental GT / Interceptor 650 VEREX Exhausts

VEREX Tasmania is proud to present our Australian Made exhaust systems for the Royal Enfield 650 lineup. These systems are designed and produced in Tasmania, Australia and give you not only more performance, but the sound to match. Find out more about VEREX on our About page! 

VEREX Full System

Royal Enfield Continental GT Interceptor 650 Full System

The VEREX Tasmania Full System for the Royal Enfield Continental GT and Interceptor 650 models is our premier system, and has gained popularity among enthusiasts across Australia. The VEREX Full System removes the poorly designed and restrictive standard headers, and the lighter reverse cone mufflers complement the styling of the bike. The front header is shorter overall to change the placement of the reverse cone mufflers, and uses the stock rubber mounting bushings to reduce fatigue on components. The VEREX reverse cone mufflers are steel wool and glass fibre packed to give a deep, throaty sound. (See video below!)

The full stainless steel system features include: 

  • Full 304 Stainless steel construction, designed and produced in Australia.
  • 1-1/2″ (38mm) straight through header tubes.
  • Total Weight: 7.5kg, Stock System Weight: 17.2kg. Total saving: 9.7kg. 
  • Discreet O2 sensor placement and compact design.
  • In-House Mandrel bent tube for perfect fitment.
  • Hand Welded | Hand Polished

What about performance?

The above dyno chart for Royal Enfield Continental GT and Interceptor 650 was performed on a stock bike, with no modifications made other than the exhaust system. Real gains can be seen once changed to the VEREX System. This represents a 10% HP gain, and a 10% torque increase, all on a stock bike!

Stock: 38.7hp / 34.9ft-lbs

VEREX Full System: 42.5hp / 38.4ft-lbs

Less than you expected? Check out the Estimated Dynojet Power shown on the bottom graph, as Dynojet Dynos will generally ready 12% higher.

The VEREX Full System is available for $1460AUD in standard brush finish or $1636AUD in mirror polish. VEREX dB killers available separately.

Get in touch with us on the Contact Page to order!

VEREX Big Bore Headers

Royal Enfield Continental GT Interceptor 650 Headers

The VEREX header set to suit the Royal Enfield Continental GT and Interceptor 650 remove some of the most restrictive aspects of the stock system. Although the stock mufflers are large and weighty, the 1-1/2″ (38mm) free flowing headers will have a noticeable effect on performance. Our design includes more discreet O2 sensor placement and reuses the stock rubber bushes.

  • Full 304 Stainless steel construction, designed and produced in Australia.
  • Fits to stock mufflers or any slipon replacement.
  • Made to fit classic styling of Interceptor 650 and Continental GT 650.
  • Discreet O2 sensor placement.
  • Significant weight saving over stock system.
  • In-House Mandrel bent tube for perfect fitment.

The VEREX Headers are available for $480AUD in brush finish, or $600AUD in mirror polish. 

Get in touch with us on the Contact Page to order!

Please note: The above picture shows extension from header to muffler. This section now integrated into the full length of the header, and no additional join is necessary. 

VEREX Slip-on Reverse Cone Mufflers

The VEREX Reverse Cone Mufflers are the signature design of VEREX Exhaust systems. Australian made, with steel wool and glass fibre packing they will make your bike sound amazing, and handle better. The 2.2kg VEREX muffler is less than half the weight of the 5kg standard option, and change the look of the rear end completely. 

  • Full 304 Stainless steel construction, designed and produced in Australia.
  • 5.6kg weight saving over stock.
  • Made to fit classic styling of Interceptor 650 and Continental GT 650.
  • Compact design.
  • Significant weight saving over stock system.
  • Hand Welded | Hand Polished

Available for $980AUD in standard brush finish, or $1100AUD in a mirror polish.

Get in touch with us on the Contact Page to order!

VEREX is a family owned and run manufacturer of high quality, unique exhaust systems for a variety of bikes. We are proud to say all of our systems are designed and made in Australia. We believe in the quality of our products, and our many happy customers are a testament to this. We are proud to be working closely with bikes shops across Australia, and being part of communities such as the Royal Enfield Australia Forum. If you would like further information please do not hesitate to contact us via our Contact Page!